Snapcar Guide
Tips + tricks for your new Snapcar.
How To Use
Clean your dash with water or rubbing alcohol before applying, especially if you've used an automotive cleaner like ArmorAll. Remove the adhesive tape and press into a flat area on your dashboard. We recommend waiting overnight for the adhesive to set before using. Then bring your phone close to Snapcar and let the magnets do the work!
With Snapcharge
Using Snapcharge with Snapcar is super easy. Just plug Snapcharge in (Our USB-C Power Adapter is recommended), place it onto the magnetic ring of Snapcar, and you're ready to charge & go!
Replacing Adhesive
Peel the white sticker off the new adhesive and stick it straight onto the old adhesive. Let it cure for 2 hours before peeling the clear cover and sticking it to your dash. Clean your dash with water or rubbing alcohol before applying, especially if you've used an automotive cleaner like ArmorAll. Wait overnight before adding your phone or any weight onto Snapcar. This method only works once - if you need to replace your adhesive for a second time, scrape the old adhesive out and apply the new adhesive straight to the bottom.